0
Your Cart
0
Your Cart
Sale!

10119 by Midland | SAE 45 Flare Fitting | Reducing Union | 3/8″ Male SAE 45 Flare x 5/16″ Male SAE 45 Flare | Brass

Original price was: $5.11.Current price is: $4.09.

-Decrease product quantity. +Increase product quantity.
SKU: aGLLIuQQU4JR Category:

SPECIFICATIONS

Applications: LP and Natural Gas, Flammable Liquids, Instrumentation, Refrigeration, Power Steering, Hydraulic and Pneumatic Systems. Used With: Copper, Brass, Aluminum and Steel hydraulic tubing that can be flared.
SAE Rating: N/A Conformance: Meets specifications and standards of ASA, ASME, SAE and MS (Military standards).
Vibration: Good resistance – use long nut when greater vibration resistance is required. Temperature Range: -65F to +250F (-53C to +121C) range at maximum operating pressures
Tolerance: +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. Lead Free: Not Lead Free
Working Pressure Ranges:
  • Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 730F with copper tubing:
Assembly Instructions:
  • 1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square.
  • 2) Slide nut on tube. Threaded end “A” of nut must face out.
  • 3) Flare end of tube with a 450 flaring tool.
    • A) Measure flare diameter
    • B) Examine flare for excessive thin out.
  • 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight.
  • 5) Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn.
  • Note: Do not over-torque as it may damage the fitting or split the tubing at the flare.
Tube OD 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 7/16″ 1/2″ 5/8″ 3/4″
Thread Size B 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 11/16-16 3/4-16 7/8-14 1-1/16-14
Crossover Series:
42R 506 656F UR2 42-R
Part Number Male SAE 45 Flare A Hex Approx. Weight
(Lbs.)
10115 1/4″ x 1/8″ 1.11″ 0.44″ 0.03
10116 1/4″ x 3/16″ 1.12″ 0.44″ 0.03
10117
(10-117)		 5/16″ x 1/4″ 1.28″ 0.50″ 0.04
10118
(10-118)		 3/8″ x 1/4″ 1.38″ 0.62″ 0.06
10119
(10-119)		 3/8″ x 5/16″ 1.44″ 0.62″ 0.08
10120
(10-120) 		1/2″ x 1/4″ 1.53″ 0.75″ 0.10
10121
(10-121)		 1/2″ x 3/8″ 1.69″ 0.75″ 0.10
10122
(10-122)		 5/8″ x 3/8″ 1.88″ 0.87″ 0.17
10123
(10-123)		 5/8″ x 1/2″ 1.87″ 0.87″ 0.14
10126
(10-126)		 3/4″ x 1/2″ 2.18″ 1.06″ 0.26
10127
(10-127)		 3/4″ x 5/8″ 2.20″ 1.06″ 0.27

Reviews

There are no reviews yet.

Be the first to review “10119 by Midland | SAE 45 Flare Fitting | Reducing Union | 3/8″ Male SAE 45 Flare x 5/16″ Male SAE 45 Flare | Brass”

Your email address will not be published. Required fields are marked *

Related products

  • Sale!

    5500-16-16-FG by Brennan Inc. | -16 Male Pipe x -16 Male Pipe | 90 Elbow | Forged Steel

    Original price was: $11.80.Current price is: $9.44.
  • Sale!

    2601-03-03-02-FG by Brennan Inc. | -03 Male JIC x -03 Male JIC x -02 Male Pipe | Tee | Forged Steel

    Original price was: $5.59.Current price is: $4.47.
  • Sale!

    2650-04-04-04-04-FG by Brennan Inc. | -04 Male JIC x -04 Male JIC x -04 Male JIC x -04 Male JIC | Cross | Forged Steel

    Original price was: $7.43.Current price is: $5.94.