0
Your Cart
0
Your Cart
Sale!

10007 by Midland | SAE 45 Flare Fitting | Long Rod Nut | 5/8″ Female SAE 45 Flare | Brass

Original price was: $6.48.Current price is: $5.18.

-Decrease product quantity. +Increase product quantity.
SKU: XEbGck4kymo3 Category:

SPECIFICATIONS

Applications: LP and Natural Gas, Flammable Liquids, Instrumentation, Refrigeration, Power Steering, Hydraulic and Pneumatic Systems. Used With: Copper, Brass, Aluminum and Steel hydraulic tubing that can be flared.
SAE Rating: SAE# 010111 Conformance: Meets specifications and standards of ASA, ASME, SAE and MS (Military standards).
Vibration: Good resistance – use long nut when greater vibration resistance is required. Temperature Range: -65F to +250F (-53C to +121C) range at maximum operating pressures
Tolerance: +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. Lead Free: Not Lead Free
Working Pressure Ranges:
  • Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 730F with copper tubing:
Assembly Instructions:
  • 1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square.
  • 2) Slide nut on tube. Threaded end “A” of nut must face out.
  • 3) Flare end of tube with a 450 flaring tool.
    • A) Measure flare diameter
    • B) Examine flare for excessive thin out.
  • 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight.
  • 5) Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn.
  • Note: Do not over-torque as it may damage the fitting or split the tubing at the flare.
Tube OD 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 7/16″ 1/2″ 5/8″ 3/4″
Thread Size B 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 11/16-16 3/4-16 7/8-14 1-1/16-14
Crossover Series:
41L 41FL N2 241 441 41
Part Number Thread Size UNF A Hex Approx. Weight
(Lbs.)
10001
(10-001)		 1/8″ 0.75″ 0.37″ 0.01
10002
(10-002)		 3/16″ 0.81″ 0.43″ 0.02
10003L*
(10-003L)		 1/4″ 0.98″ 0.55″ 0.03
10003
(10-003)		 1/4″ 0.94″ 0.56″ 0.03
10004
(10-004)		 5/16″ 1.12″ 0.62″ 0.04
10005
(10-005)		 3/8″ 1.31″ 0.75″ 0.06
10006
(10-006)		 1/2″ 1.62″ 0.87″ 0.12
10007
(10-007)		 5/8″ 1.88″ 1.06″ 0.20

* “L” means light pattern: These fittings are completely interchangeablewith full pattern fittings, but have been modifiedin some way. This modification is usually in thelength of the pipe threads. Used in plumbingand light industrial applications

Reviews

There are no reviews yet.

Be the first to review “10007 by Midland | SAE 45 Flare Fitting | Long Rod Nut | 5/8″ Female SAE 45 Flare | Brass”

Your email address will not be published. Required fields are marked *

Related products

  • Sale!

    1603-04-04-04-SS by Brennan Inc. | -04 Female Pipe Swivel x -04 Female Pipe Swivel x -04 Female Pipe Swivel | Tee | Stainless Steel

    Original price was: $33.26.Current price is: $26.61.
  • Sale!

    FS2503-12-08-FG by Brennan Inc. | -12 Male Face Seal x -08 Male Pipe | 45 Elbow | Forged Steel

    Original price was: $8.18.Current price is: $6.54.
  • Sale!

    5500-20-20-FG by Brennan Inc. | -20 Male Pipe x -20 Male Pipe | 90 Elbow | Forged Steel

    Original price was: $27.51.Current price is: $22.01.