0
Your Cart
0
Your Cart
Sale!

10489 by Midland | SAE 45 Flare Fitting | Forged Reducing Swivel Union | 5/8″ Female SAE 45 Flare x 1/2″ Female SAE 45 Flare | Brass

Original price was: $12.81.Current price is: $10.25.

-Decrease product quantity. +Increase product quantity.
SKU: JAoIisHltwhK Category:

SPECIFICATIONS

Applications: LP and Natural Gas, Flammable Liquids, Instrumentation, Refrigeration, Power Steering, Hydraulic and Pneumatic Systems. Used With: Copper, Brass, Aluminum and Steel hydraulic tubing that can be flared.
SAE Rating: N/A Conformance: Meets specifications and standards of ASA, ASME, SAE and MS (Military standards).
Vibration: Good resistance – use long nut when greater vibration resistance is required. Temperature Range: -65F to +250F (-53C to +121C) range at maximum operating pressures
Tolerance: +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. Lead Free: Not Lead Free
Working Pressure Ranges:
  • Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 730F with copper tubing:
Assembly Instructions:
  • 1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square.
  • 2) Slide nut on tube. Threaded end “A” of nut must face out.
  • 3) Flare end of tube with a 450 flaring tool.
    • A) Measure flare diameter
    • B) Examine flare for excessive thin out.
  • 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight.
  • 5) Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn.
  • Note: Do not over-torque as it may damage the fitting or split the tubing at the flare.
Tube OD 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 7/16″ 1/2″ 5/8″ 3/4″
Thread Size B 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 11/16-16 3/4-16 7/8-14 1-1/16-14
Crossover Series:
700R
Part Number Female Flare UNF A B Hex 1 Hex 2 Approx. Weight
(Lbs.)
10487
(10-487) 		3/8″ x 1/4″ 0.72″ 0.60″ 0.81″ 0.62″ 0.08
10488
(10-488) 		1/2″ x 3/8″ 0.84″ 0.70″ 0.94″ 0.81″ 0.12
10489
(10-489) 		5/8″ x 1/2″ 0.98″ 0.82″ 1.03″ 0.94″ 0.22

Dimension data can change without notice

Reviews

There are no reviews yet.

Be the first to review “10489 by Midland | SAE 45 Flare Fitting | Forged Reducing Swivel Union | 5/8″ Female SAE 45 Flare x 1/2″ Female SAE 45 Flare | Brass”

Your email address will not be published. Required fields are marked *

Related products

  • Sale!

    6701-L-20-20 by Brennan Inc. | -20 Male JIC x -20 Female JIC Swivel | Swept 90 Elbow (Long) | Steel

    Original price was: $95.22.Current price is: $47.61.
  • Sale!

    5000-06-06-SS by Brennan Inc. | -06 Female Pipe x -06 Female Pipe | Straight | Stainless Steel

    Original price was: $17.26.Current price is: $13.81.
  • Sale!

    5500-20-20-FG by Brennan Inc. | -20 Male Pipe x -20 Male Pipe | 90 Elbow | Forged Steel

    Original price was: $27.51.Current price is: $22.01.