0
Your Cart
0
Your Cart
Sale!

12029 by Midland | Inverted Flare Fitting | 1/8″ Female Inverted Flare x 1/8″ Female NPTF | Adapter | Brass

Original price was: $5.97.Current price is: $4.78.

-Decrease product quantity. +Increase product quantity.
SKU: 9UTv36ziLBUG Category:

SPECIFICATIONS

Applications: Hydraulic brake, power steering, fuel lines and transmission cooler lines, LP and natural gas. Used With: Copper, brass, aluminum and steel hydraulic tubing that can be flared.
SAE Rating: SAE# 040103 Conformance: Meets specifications and standards of ASA, ASME, SAE and MS (Military Standards).
Vibration: Excellent resistance. Temperature Range: -65F to +250F (-53C to +121C) range at maximum operating pressures.
Advantages: Very low cost and reusable. Seats and threads are internal and protected. Compact, excellent vibration life. Short nut affords very close tube bends. Tolerance: +/- .03 on all dimensions.
Working Pressure Ranges:
  • Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73F with copper tubing:
Assembly Instructions:
  • 1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square.
  • 2) Slide nut on tube. Threaded end “A” of nut must face out.
  • 3) Flare end of tube with a 450 flaring tool.
    • A) Measure flare diameter
    • B) Examine flare for excessive thin out.
    • C) On thin wall, welded or brazed tubing, use double flare to prevent pinch-off and cracked flares.
  • 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight.
Tube OD 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 7/16″ 1/2″ 5/8″ 3/4″ 7/8″ 1″
Thread OD
(Threads per inch)		 5/16-28 3/8-24 7/16-24 1/2-20 5/8-18 11/16-18 3/4-18 7/8-18 1-1/16-16 1-3/16-16 1-5/16-16
Standard Metric Threads:
Description
Tube Size		 Thread OD Crest
(Pitch)		 Thread
Description
Japanese 3/16″ 10mm 1.0mm M10 x 1.0
European 3/16″ 10mm 1.0mm M10 x 1.0
GM 6mm 12mm 1.0mm M12 x 1.0
Fuel 5/16″ 14mm 1.5mm M14 x 1.5
Fuel 3/8″ 16mm 1.5mm M16 x 1.5
Measuring Metric Threads: Measure the O.D. of the threads and the crest to crest distance (pitch) in millimeters between threads.
Crossover Series:
46IN 46IFHD 252 46W
Part Number Female Inverted Flare x Female NPTF A Hex Approx. Weight
(Lbs.)
12029 1/8″ x 1/8″ 0.716″ 0.50″ 0.03
12032
(12-032)		 3/16″ x 1/8″ 0.75″ 0.50″ 0.02
12033
(12-033)		 1/4″ x 1/8″ 0.75″ 0.53″ 0.02
12030 1/4″ x 1/4″ 1.01″ 0.751″ 0.11
12034
(12-034)		 5/16″ x 1/8″ 0.78 “ 0.59″ 0.04
12035
(12-035)		 3/8″ x 1/4″ 1.03″ 0.75″ 0.08
12031 7/16″ x 1/4″ 1.06″ 0.81″ 0.11
12037 1/2″ x 1/4″ 1.09″ 0.90″ 0.12
12036
(12-036)		 1/2″ x 3/8″ 1.10″ 0.90″ 0.12
12039 5/8″ x 1/2″ 1.32″ 1.065″ 0.19
12099 3/4″ x 3/4″ 1.50″ 1.25″ 0.36

Reviews

There are no reviews yet.

Be the first to review “12029 by Midland | Inverted Flare Fitting | 1/8″ Female Inverted Flare x 1/8″ Female NPTF | Adapter | Brass”

Your email address will not be published. Required fields are marked *

Related products

  • Sale!

    2601-06-06-06-FG by Brennan Inc. | -06 Male JIC x -06 Male JIC x -06 Male Pipe | Tee | Forged Steel

    Original price was: $6.39.Current price is: $5.11.
  • Sale!

    5600-12-12-12-SS by Brennan Inc. | -12 Male Pipe x -12 Male Pipe x -12 Male Pipe | Tee | as coded per SAE J846 | Stainless Steel

    Original price was: $154.80.Current price is: $77.40.
  • Sale!

    2650-04-04-04-04-FG by Brennan Inc. | -04 Male JIC x -04 Male JIC x -04 Male JIC x -04 Male JIC | Cross | Forged Steel

    Original price was: $7.43.Current price is: $5.94.